LoRa built-in gateway bridge (Larid RG1xx) with Loraserver v.3?

Hi there,

I own the gateway Larid RG1xx, which has built-in support for the gateway bridge. But, after loraserver version 3 was released. I am unable to get it to function properly, I am unable to see live Lora packets, last seen, and so on…

How would I be able to use the built-in gateway bridge with the newly released Loraserver (v.3)?

You could still use the UDP packet-forwarder and host your own LoRa Gateway Bridge (v3) instance until Laird has pushed an update :slight_smile:

Right @brocaar , I’ll do that. I suggest you edit this page https://www.loraserver.io/lora-gateway-bridge/gateway/laird/. To avoid any more confusions with other users in the future.


I have a follow up question. Since my server is behind a firewall and I want to use port 1700. Should I open TCP or UDP 1700?


The Semtech packet-forwarder uses UDP, so you should open UDP port 1700.

So, the port UDP is open. The gateway (Samtech packet-forwarder) cannot connect to the gateway bridge, taking into account that the gateway and gateway bridge are not connected to the same interface, but share subnet. Listening on “” (All interfaces).

I have followed: https://www.loraserver.io/guides/troubleshooting/gateway/, but no luck since I’m not receiving anything on gateway bridge’s machine.

Would it be possible to downgrade back to Loraserver v.2, and how would I proceed on a Ubuntu machine?


See 3.0 downgrade to 2.8.

I’d like to do a fresh install for 2.8.

Where do I find 2.8?


See How do I install previous LoRaServer?.

Done: https://www.loraserver.io/lora-gateway-bridge/gateway/laird/ :slight_smile:

Hey, I had the same problem because our Loraserver-Admin updated to v3.
I wrote a mail to Laird about that and they replied (last week):

It seems Brocaar made some changes on used ports and others. We will work on setting up RG1xx with the latest version of Loraserver and provide update sometime next week.

So hopefully we will get an update this week. Hope that helps and nice service from Laird.

Please see also the updated documentation here: https://www.loraserver.io/lora-gateway-bridge/gateway/laird/.

I’ve installed lora-gateway-bridge on the serve that host loraserver v3 and lora-app-server, I also have configured the Laird gateway to use semtech forwarder and I’m receiving data, but not the actual packages. am I missing something?