Failed to start concentrator - ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x32


#1

Hello,
When i am trying to run forwarder, i receive the following error:

INFO: packets received with a valid CRC will be forwarded
INFO: packets received with a CRC error will NOT be forwarded
INFO: packets received with no CRC will NOT be forwarded
lgw_start:823: Note: calibration started (time: 2300 ms)
lgw_start:844: Note: calibration finished (status = 191)
Info: Initialising AGC firmware…
lgw_start:1026: ERROR: AGC FIRMWARE INITIALIZATION FAILURE, STATUS 0x32
ERROR: [main] failed to start the concentrator

If i run ./util_tx_test -f 868.5 -r 1257 command, seems that concentrator works properly.
Could you please suggest how can i fix my problem?

P.S I use RP3 + imst

Best regards


#2

I found out the problem root cause. It was due to power supply. Below 1 A power supply is not enough for RR + imst