Slow/No Loading of Gateway/Application frames

ChirpStack Application Server
1

Hi,

Most times gateway/application frames are not shown in the app server. The loading screen just keeps on trying with no result. I tried installing the framework on raspberry pi and a local server but the issue persists. The frames are displayed sometimes after a fresh login.

loraserver
loraserver.png1735×712 38.6 KB

loraserver_app
loraserver_app.png1888×696 50.5 KB

The Uplink frame counter field in Devices > Activation shows increments which clearly states that the app server is receiving data. MQTT client shows the payloads as well.

Loraserver_frames
Loraserver_frames.png1428×421 14.7 KB

Is it an issue related to the database? Slow DB RW?
Any help is deeply appreciated.

Regards,

Akshai

2

This might need improvement at the UI side, but when the dot is red, it means you’re not (yet) connected (Websockets). See also:

https://forum.loraserver.io/t/rpc-error-code-unauthenticated-and-live-frame-logs-live-event-disconnected/1093/9

3

Thank for the quick help. I managed to get the frames log view by switching to my ip address:8080 (https://192.168.0.64:8080) instead of using https://loraserver.local. Zeroconf was configured on the system with 80 port mapped to 8080, which make me think. Must have been an issue with the port forwarding config.