Scenario for GPS monitoring

Applications
1

I need to set up a scenario that has 30 nodes (arduino + gps module NEO-6M) connected sending data in the interval of 3 ~ 5 seconds, I know that with LoRaWan protocol this is practically impossible.

Does anyone have any idea what settings and settings I can use to have all 30 nodes connected using the loraserver.io platform?

I recently purchased a dragino gateway LG02
I know it is limited and I do not intend to use LoRaWan gateway, can I use it as LoRa Gateway Bridge?

Thank you!

2

The server won’t limit this, it will be the duty cycle limitation on the transmitter.

Is this EU868 or another region? if it’s European you can use a channel with no duty cycle limit. e.g. 869.7 - 870.0 @ 5mW has no duty cycle. i’d make sure to lower the bandwidth and SF to get better range.

1 Like
3

Hi I use the US915 in Brazil.

Do you have a tutorial or document that explains more about duty cycle limit?

4

Hi,
Brazil uses AU915-928 (same as Australia) it’s similar to US915 but not exact.

Here is a good guide on Duty Cycle limits. it is however based on European but the same principles apply.

I think Australia is limited to 1% duty cycle for all channels due to the shared spectrum.

Sources:

5

Brazil uses AU915-928 (same as Australia) - Exactly it was my mistake to type in US915.

Thanks for the links!